China Handheld dot peen traceability Chassis Number pneumatic marking machine Manufacturer and Factory

Handheld dot peen traceability Chassis Number pneumatic marking machine

Short Description:

Our machine consists of three parts:the computer system,the control system,the air compressor. Inputting the printing contents into the computer,the control system will control the marking pin working under a certain trajectory on an X-Y two-dimensional plane.

At the same time, affected by the compressed air,the marking pin begin to work. Because of its small and light weight design, It’s easy to carry for marking, has gradually became our company’s primary products.

Send email to us Resources

Product Detail

Product Tags

The advantage of products

1. 7 inch touch controller and PC controller can be optional.

2. Lightweight, portable design, convenient for carrying in outgoing.

3. Factory self-processed marking stylus with high hardness HRC60 can mark deep 0.1~1mm.

4. 100 kinds of fonts, can customize according to your VIN code.

5. 2 Years warranty, lifelong free maintenance.

Parameter

item	value
Marking speed	2-5 characters(2x2mm)/s
Stroke Frequency	300times/s
Marking depth	0.01 to 1mm (Vary to the material)
Marking contents	Alphanumeric info, Data Matrix or dot matrix 2D codes, Shift codes, Barcode, Serial Number, Date, VIN Code, Time, Letter, Figure, Logo, Graphics and etc.
Stylus Pin Hardness	HRA92/HRA93
Marking area	80x40mm,130x30mm,140x80mm,200x200mm
Dimensions	140x20x240mm
Marking materials	below HRC60 metallic and nonmetallic materials ,above HRC60 need special stylus
Repeat accuracy	0.02-0.04mm
Power	300W
Work voltage	AC 110V 60HZ or AC220V 50HZ
Compressed Air( Pneumatic Air)	0.2-0.6Mpa
Connection	USB and RS-232
Controller	PC controller
Power type	Pneumatic
Marking directions	up, down, left, right, and the circular arc surface marking